Ref. No.:FURNACEHOMOG240301
YEAR:2009
Brand:Rackwitz Industrieanlagen GmbH
Qty:1 Second-hand homogenising furnace for aluminium logs
Qty. 1 Second-hand log homogenising furnace
Mfc.: Rackwitz Industrieanlagen GmbH, Built: 2009
Annual production: 50.000 tons mix, Furnace charge max.: 25 tons
Furnace performance: 6 - 7 t/h of 10“ LOG
Logs diameter: 103 mm - 405 mm, Logs length: 7,000 – 7,300 mm
Furnace type: Cross cirular, Furnace cross circulator 3 pieces Heating zone
Furnace Dimensions: 30,300 mm x 3,400 mm x 11,000 mm – L x W x H
MATERIAL
Used material: 6082, 6060, 6063, 7003, in general: aluminum alloys 7000 and the 6-th series,
AlMgSi 0.5 and after the numerical composition
LOG dimensions: Rectangle 342 x 185 mm
Diameter: 103 mm, 254 mm, 280 mm (reference pin)*, 330 mm, 405 mm
*Reference pin: All capacities, consumption and technical parameters are set up for this diameter. Other dimensions affect these parameters.
Log length: 7,000 – 7,300 mm
HOMOGENISING FURNACE
Type of furnace: Cross circulator
Air flow transverse to the transport direction
Log passage: automatic, hanging
Furnace zones: 3 pieces, Heating zone capacity: 16 positions, Holding zone capacity: 24 positions,
Cooling zone capacity: 8 positions
Heating:
Working temperature: 565 – 600 °C variable, Heat-up time from 20 °C to 550 °C: 3 hours / 10“ Log
Temp. tolerance: +/- 2 °C at the log surface, Preservation time: 4 hours, variable
Heating:
Gas type: Natural gas H cross circulation, Lower heat value (natural gas): 22,350 kCal/m3
Burner Recuperator-high-speed-burner
Mfc.: NOXMAT GmbH, Type: RHGB 250, Pieces: 9, Output: 250 kW/burner
Exhaust: Hot gas circulation fans
Mfc.: Piller Industrieventilatoren GmbH, Pieces: 6, Type: 50970 UMCX 80560
Cooling
Cooling rate: 600 - 300 °C < 30 minutes, 300 - 100 °C < 60 minutes
Cooling air suck in: plant air
Cooling air outlet: into the plant air, optional: also outward
Exhaust: Radial-flow fan with sucking in muffler and in the sound cabin
Mfc.: Bissinger GmbH, Type: FP 711 N4A RD270 and LD270, Pieces: 2
HYDRAULIC AGGREGATE
Operating medium hydraulic fluid HFC, Capacity: ca. 140 l/min
Volume: 100 ccm/U, Pressure: 140 bar, Power: 30 kW, 1450 RPM, 400/690 V, 50 Hz
ELECTRICAL SYSTEM
Connection voltage (main supply): 3 x 400 V, TN-C-S, 50 Hz
Control voltage: 24 VDC, Fusing: 20 A, Electrical Control PLC: Allen Bradly Control Logix, Cabinets: 3 pieces
- +AE1 Part Movements, Log Cooling, Main Disconnect Switch 340 V
- +AE2 Part Movements, at the Furnace Top, Main Disconnect Switch 330 V
- +AE3 Part Furnace Heating, at the Furnace Top, Main Disconnect Switch 490 V
Visualisation: Operating Panel PV Plus 1500 Allen-Bradley